Engineering Computing Services
0012 Seaton Hall
920 N. 17th St.
Manhattan, KS 66506
Phone: 785-532-4643
support@engg.ksu.edu
Fiedler Auditorium Instructions
To download these instructions in PDF format, click here.
Fiedler Auditorium Reservation Policy
The auditorium MUST BE RESERVED in advance. To request a reservation and obtain keys to the podium and sound closet, contact the Dean of Engineering's office.
Dean of Engineering Office
Room: 1046 Rathbone
Phone: 785-532-5590
Technical Support
- Engineering Computing Services
-
532-4643, support@engg.ksu.edu
Lighting
The lighting panel is located near the podium, by the door to the back room. The buttons numbered 1 through 5 are preset lighting patterns that can probably meet most needs without further adjustments. Moving forward or backward in the numbered sequence makes the room darker or brighter.
- 1: All lights on.
- 2: Same as (1), but whiteboard lights are turned off.
- 3: Same as (2) but front downlights are turned off.
- 4: Same as (3) but audience area is dimmed.
- 5: Same as (4) but audience area is even darker.
- 6: All off except aisle and wall sconce lights.
To Turn the Projector On
- Tap the podium touchscreen to activate the podium systems and projector.
To turn the Projector Off
- Press Exit System on the touchscreen. Confirm exit by pressing Yes on the dialog box that appears. The system will cooldown the projector and power down the podium.
- Turn off all lights as you exit.
- Return the keys to the Office of the Dean of Engineering.
To use the Presentation Computer
- Press Computer on the podium touchscreen, then Send to the display you would like.
- A USB port is available on the Podium Panel to the right of the pdoim touchscreen.
Warning: Security software on this computer will erase all changes made on the next reboot. This includes any files or data you may have created. These lost files are non-recoverable. To use a network drive for your data, please use the "ENGG Login" shortcut located on the desktop of the computer.
To Connect a Laptop
- Locate the VGA or HDMI cable in the slide-out tray of the Fiedler Podium. VGA: Must set laptop to 1080p resolution
- Connect the VGA\HDMI cable to the connector on the Podium Panel which is to the right of the podium touchscreen and the other end of the cable to your laptop.
- Press VGA or HDMI Laptop on the podium touchscreen, then Send To Display you would like.
To use the Document Camera
- The Samsung Document Camera is located on the right side of the podium on a slide-out tray. The slide-out tray must be unlocked prior to use.
- Raise the camera arm to its upright position.
- To turn on the document camera, press the power button at the top left of the button bank.
- To display the document camera, press Document Camera on the podium touchscreen, then Send To Display.
To use the Lapel Microphone
- To use the Lapel Microphone move the switch from the OFF position to the ON position. A green light will indicated that the microphone is functioning.
- Please remember to switch off the Lapel Microphone when you are finished using it.
- Note:There are wireless lapel and handheld mics available for use located in the left-hand side drawer of the podium.