Rathbone 1052 / 1064 Instructions

To download these instructions in PDF format, click here

Technical Support 

   College of Engineering Computing Services

   Phone: 785-532-4643

   Email: support@engg.ksu.edu

To turn on the projector

  • Locate the remote on the chalkboard tray and press the Power button on the projector remote.
  • At the start up, the preparation screen will display a 30 second countdown. After the countdown, the projector will display the input that is selected. 

To turn the projector off

  • Locate the remote on the chalkboard tray and press the Power button.
  • Power off? will be displayed on the screen. Press the Power button again to turn the projector off. 

     

To use the presentation computer

    Press button 2 on the HDMI switch to display the podium Computer.

 

To use the document camera

  • Press button 3 on the HDMI switch to display the Document Camera.
  • Turn on the Document Camera.

To use a laptop

  • Press button 4  on the HDMI switch to display your Laptop.
  • Plug the provided VGA cable (see below) into your laptop and make sure the projector is on input. The laptop video will automatically take preference.
  • It may be necessary to tell your Windows laptop to direct signal to the projector. Locate the  key on your laptop, hold it down and press the "P" key simultaneously. Four small boxes should appear, and you will want to select "Duplicate."
  • If you are using a Mac laptop you will need to connect the provided VGA cable, click the upper left-hand Apple menu, select System Preferences, then Displays, and finally select "Detect Displays." Please locate your computer manual for keyboard shortcut.


WARNING: Security software on this computer will erase all changes made on the next reboot. This includes any files or data you may have created. These lost files are non-recoverable. To use a network drive for your data, please use the “ENGG Login” shortcut located on the desktop of the computer
.